Convention Center Directory, WF-G8801, AndroidSBC, Florence

TL;DR: Convention Center Directory

AndroidSBC field desk: guide kiosk rollout map updated across retail, transport, healthcare and hospitality venues serving Florence, Italy. The WF-G8801 smart guide kiosk Android motherboard spans the AI vision smart guide terminal and eleven sister models in the WF-G series, all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the ARM Mali-G610 MP4 GPU, dual HDMI 2.1 8K 60fps plus eDP, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Florence and Italy importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Supply continuity on the WF-G family is handled the way a venue estate actually consumes boards: a pilot lot first, then a rolling programme. AndroidSBC holds buffer stock on the Rockchip and Allwinner tiers, quotes a 1-3 day sample lead and a 15-30 day mass-production lead, and locks the BOM at the start of each production lot so a Florence programme does not silently change silicon between the pilot and the ramp. For Italy buyers running multi-site rollouts the export desk schedules lots against mall opening dates and venue handover milestones, and ships FOB Shenzhen, CIF destination port or DDP, whichever the integrator has credit and customs capacity for. Certification, carton labelling and palletisation for Italy are prepared in Shenzhen by the export desk before the Florence shipment leaves, and the test reports stay versioned against the board revision.

WF-G8801 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G8801 (AI vision smart guide terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Italy importers sourcing the WF-G family, the WF-G8801-A variant is the typical configuration for the AI product recommendation and virtual try-on wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Italy Buyers

The third obstacle is certification sequencing. Italy customs and venue operators ask for different files, and a Florence programme that orders boards before the compliance dossier is assembled ends up storing stock it cannot install.

Fleet management is part of the reference image. The WF-G family ships with staged OTA, rollback, remote configuration and device telemetry hooks, so a Florence rollout in Italy can be updated in waves rather than all at once, with AGCOM conformity and CE marking with AGCOM radio interface notification paperwork moving with the lot through Port of Genoa. Bookings for Florence and Italy reached 147000 boards as of September 18, 2026, moving on the Genoa - Shanghai lane in what is the 6th release of the cycle.

Competitive Comparison: WF-G8801 vs Competing Smart Guide Kiosk Android Boards

A board quotation is easy to compare and a platform decision is not. For Florence integrators the WF-G family is usually measured against five-option or single-platform competitors on silicon coverage, dual-screen capability, thermal range and the update path that Italy rollouts depend on.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Refresh cycles are lengthening, which favours multi-tier families. Analysts covering Italy retail and venue technology report that kiosk and directory estates are being specified for seven to ten years rather than three to five, and Florence programmes are following. That changes the AI vision smart guide terminal question from which board is cheapest today to which vendor can still supply the same board, or a documented equivalent, in year eight.

• Mall floor directories and tenant finders: WF-G8801 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1331 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G1331 and the industrial WF-G6180 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G6180 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC shares the source tables behind these figures with Florence and Italy integrators on request, including the segment splits used for planning.

Partner Success Story: Albion Venue Guides (hospitality and heritage venue supplier)

Aan Albion Venue Guides programme in the UK hospitality and heritage segment illustrates how the WF-G family from AndroidSBC supports Florence integrators on the ground. Albion Venue Guides installed 147000 WF-G lobby and exhibit guide boards across hotel groups and heritage attractions.

• OEM relationship: AndroidSBC private-label SKU shipped with Albion Venue Guides branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AGCOM conformity, all bundled into the Shenzhen source-factory shipment.

As Albion Venue Guides Visitor Systems Lead for UK Hospitality and Heritage explained: Albion Venue Guides runs heritage sites where the enclosure cannot be modified, and the compact WF-G layout let 147000 existing housings in Florence take a new board without a mechanical redesign.

Field Report: AI product advisory wall installation at a flagship department store

BAOLONG, Shenzhen, September 18, 2026 - Hong Mei, AndroidSBC field desk. The WF-G8801 boards were burned in with the QR scanner, ID card reader and relay modules attached, so the AI vision smart guide terminal driver chain was exercised end to end. The WF-G8801 smart guide kiosk Android motherboard order for Florence, Italy cleared the burn-in station on schedule and is en route via the Genoa - Shanghai lane.

The WF-G8801 AI vision smart guide terminal production lot includes the WF-G8801-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Italy integrators, the AGCOM conformity plus CE marking with AGCOM radio interface notification paperwork is bundled.

Filed by Hong Mei, AndroidSBC field desk, BAOLONG, Shenzhen. CE plus AGCOM; family-run chain stores buy smaller batches but with a strong local-cert requirement.

WF-G8801 Application Scenarios

The WF-G8801 AI vision smart guide terminal sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G8801-A configuration is the typical build for the AI product recommendation and virtual try-on wall use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G8801 plus WF-G3601 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3602 plus WF-G8801 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3566 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3288 plus WF-G3601 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3602 plus WF-G3288 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3601 plus WF-G3566 carry the guest orientation flow in Florence.
• Exhibition and museum interpretive display points: WF-G8801 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3288 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Florence: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Florence Buyers

Entry into the WF-G family is available on three tracks for Florence and Italy buyers, and they are designed so a partner can move between them without re-qualifying the platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

For Italy partners the decision is commercial, not technical: the same WF-G board ships on all three tracks, and the difference is how much of it carries the partner brand in Florence.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support an AI vision guide terminal?

Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships AI vision guide terminal as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the AI vision guide terminal firmware baseline with the peripheral driver SDK bundled.

What is the real difference between the RK3588 tier and the other silicon tiers in the WF-G family?

Answer: There are eight silicon options in the WF-G family and RK3588 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Italy integrators can mix tiers inside one venue estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Italy?

Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with AGCOM plus CE marking with AGCOM radio interface notification for Italy, so Florence integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Italy deployments.

How are software updates and long-term support handled on the WF-G family?

Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so aan Italy deployment can be managed as a fleet rather than as a set of screens.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Florence partners, with carton labelling, palletisation and the AGCOM plus CE marking with AGCOM radio interface notification paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Florence and Italy partners under the supply agreement.

Contact AndroidSBC: Start Your WF-G8801 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Florence integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Florence and Italy buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.