RK3588 Mali-G610 MP4 Custom GPU Board, WF-C3588-K4, AndroidSBC, Florence

TL;DR: RK3588 Mali-G610 MP4 Custom GPU Board

SHENZHEN, China, September 12, 2026 - Wanlin Longgang released a 35,740-unit WF-C3588-K4 lot for Florence, Italy this week, the 185th run booked against the Rockchip RK3588 allocation.

AndroidSBC opens the custom RK3588 motherboard platform to overseas OEM buyers and industrial integrators serving Florence, Italy. AndroidSBC is releasing the full WF-C3588 custom motherboard line for Florence and Italy: nine variants built on the Rockchip RK3588 octa-core 6 TOPS NPU platform, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. The line ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation handled in-house.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 exists because Italy buyers kept asking one supplier for two different custom board tiers. Wanlin Manufacturing Group answered by putting nine custom variants on the same Rockchip RK3588 octa-core silicon with 6 TOPS NPU, 8K H.265 video and up to 32GB of LPDDR5. The group runs SMT, burn-in and pre-compliance testing in one Longgang building in Shenzhen, and the export desk holds the certification file rather than passing it back to the importer. For a Florence distributor that means one vendor file, one document format and one MOQ structure across the custom variants it sells.

WF-C3588-K4 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-K4 (Custom Kiosk and POS Terminal Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Italy importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-K4-B) variant is the typical configuration for the custom self-service and POS programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Kiosk and POS Terminal Board for Italy Buyers

The recurring problem for Florence and Italy buyers sourcing a custom kiosk and pos terminal board is not the headline unit price, it is whether the allocation actually holds. The Rockchip RK3588 needs its own wafer slot, and brokers who quote from stock frequently cannot honour that slot once a 35,740-unit push lands mid-quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Florence have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC handles it by doing the custom I/O build, the software burn and the documentation at the factory: every lot leaves Longgang with the certified image loaded, a unit-level burn-in barcode, and a Technical File that carries the test reports. The nine WF-C3588 custom variants cover self-service kiosks, ordering terminals, checkout systems, vending machines, parcel lockers, smart lockers, unattended retail, and POS registers with three memory configurations each, which means a Florence integrator can usually match a customer requirement without a bespoke production run.

Compliance for Italy is handled at the factory rather than after arrival. In Italy the AV integration channel is highly regional, so distributors usually build a catalogue around one or two platforms rather than a wide line. The Longgang export desk builds the destination-market file for CE marking with AGCOM radio interface notification administered by AGCOM and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Genoa on the Genoa to Ningbo lane.

Competitive Comparison: WF-C3588-K4 vs Competing RK3588 Boards

Three groups of board compete for the custom kiosk and pos terminal board socket. The first is catalogue silicon sold on price with no customization route and no certification file. The second is re-badged stock where the seller cannot produce a schematic or a test report. The third is a genuine custom platform on Rockchip RK3588 with the engineering desk, the burn-in rack and the certification file in one Longgang building. The WF-C3588-K4 sits in the third group.

• vs standard SBCs in kiosks: the WF-C3588-K4 arrives with the serial bank, the payment profile and the kiosk ROM already in place, so the integrator does not build a stack from parts.
• vs POS chipset vendors: the 6 TOPS NPU adds vision features on the same board that runs the till, without a second compute module.
• vs turnkey terminal importers: the board-level customization path lets a kiosk brand change the I/O and the firmware without changing the terminal factory.
• vs unbranded boards: per-unit barcodes and burn-in records give the estate a real RMA trail instead of a swap-and-hope process.

Global Custom Kiosk and POS Board Market Trends

The Custom Kiosk and POS Board market is the frame that decides how Italy importers time their custom kiosk and pos terminal board orders. The figure most Italy buyers quote when they argue about allocation is the Edge AI hardware segment, which MarketsandMarkets sizes at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030); it is the public proxy for the RK3588-class silicon that custom board buyers compete for, not a forecast for this category. For Florence, three buying patterns are shaping the WF-C3588 order book:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-K4 board carries that headroom without a board change.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.

Channel analysts tracking the Custom Kiosk and POS Board category note that allocation discipline, not unit price, has become the deciding factor for buyers who need a twelve-month programme to hold.

In all three cases, Florence buyers are converting spot quotes into blanket orders with a monthly lot release, because a custom motherboard programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Tessera Compute in Florence, Italy

Tessera Compute, an ARM PC and thin-client brand serving the Italy market, deployed 3,800 custom WF-C3588-P8 ARM PC motherboards for an education and enterprise desktop line. The rollout covered the self-service ordering kiosk, smart vending machine, and age-gate terminal workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,800 custom WF-C3588-P8 ARM PC motherboards for an education and enterprise desktop line
• Region: Florence, Italy
• Models used: WF-C3588-K4 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Genoa via the Genoa to Ningbo lane

"One platform, three chassis, one firmware line. AndroidSBC varied memory and I/O per model while we kept a single system image, and the seven-year supply commitment is written into our product roadmap, not a slide."

- Katrin Vogt, Head of Engineering

Field Report: a Florence hospitality property where 35,740 units of the WF-C3588-K4 board were installed behind guest-room displays during a property-wide IPTV refresh

Reporter Lin Yu, on the ground in Florence, Italy. The property team pulled every legacy box out of the guest rooms across a two-day window and replaced them with WF-C3588-K4-based units. Once the head-end was live, it pushed a property-wide application build plus the DRM credentials into every room over the in-house network, and the rollout finished a week ahead of the season opening.

The QA lead noted that the WF-C3588-K4 lot was the third consecutive run to clear the aging bench without a retest.

The inspection confirmed three things on the spot: the WF-C3588-K4 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with AGCOM radio interface notification administered by AGCOM, cleared for entry at Port of Genoa on the Genoa to Ningbo lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Italy importers can hand straight to their customs broker.

Filed by Lin Yu, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-K4 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-K4 (Custom Kiosk and POS Terminal Board) as the lead SKU for Florence and Italy programmes:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Checkout and POS register: a retail chain drives the register, the scanner bank and the payment terminal from one board.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.
• Parcel locker bank: a locker network runs door control and a camera per bay on the multi-serial I/O profile.
• Ticketing kiosk: a transit operator prints tickets and reads QR passes on an offline-capable terminal.
• Age-gate terminal: a licensed venue runs on-device face age estimation with no cloud round trip.
• Unattended retail store: a smart store runs entry gates, shelf cameras and checkout analytics on one board class.
• Queue analytics display: a bank branch counts queues locally and posts wait times to the lobby screen.

Partnership Models for Florence Buyers

AndroidSBC runs three engagement tiers for Italy importers and brand owners sourcing a custom kiosk and pos terminal board on the WF-C3588 custom line:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Florence first order on the WF-C3588-K4 normally lands on the 8GB + 64GB (WF-C3588-K4-B) configuration at MOQ 5,000 units per shipment, with standard samples in 1-3 days and a 15-30 day mass-production window on custom builds.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Custom ROM, custom BSP and custom SDK work are all part of the ODM tier. AndroidSBC builds the Android image (12, 13, 14 or 15, GMS or AOSP), ports the Linux BSP to your carrier revision, and releases the SDK modules your team needs under NDA. The engineering desk carries the port itself, so a Italy integrator is not left debugging an unmodified vendor BSP against a carrier it was never designed for.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. The RK3588 NPU runs INT4, INT8, INT16, FP16, BF16 and TF32, and AndroidSBC supports model deployment through the Rockchip RKNN-Toolkit2, with quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet. As part of the ODM tier, the engineering desk walks your model from framework to RKNN format and validates it on the actual board configuration you are shipping, not a reference unit. Model files are versioned so a retrained model can be pushed to field units through OTA without a board swap.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a Italy project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for Italy, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration follow FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-C3588-K4 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in and configuration record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-C3588-K4 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-C3588 custom motherboard line. Florence and Italy importers, brand owners and distributors who want the custom kiosk and pos terminal board direct from the Longgang plant can reach the export desk at:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with AGCOM radio interface notification for Italy, administered by AGCOM, entering at Port of Genoa on the Genoa to Ningbo lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For a customization conversation, it helps to state the target annual volume, the I/O and memory changes required, the certification scope (CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, GMS, EDLA or EN 55032 plus EN 55035), and the preferred Incoterm (FOB Yantian, FOB Shekou, CIF, DDP, or DDP-Amazon). The export team returns a per-lot quote plus the variant-by-variant MOQ matrix for the WF-C3588 line within two business days.